1. If the door is aluminum and rivnuts must be
installed, refer to Figure 21 and PERFORM the
following:
6. INSTALL the operator mounting bracket cover over
the operator mounting bracket.
b. INSTALL and TIGHTEN the supplied through-
bolts, the four ¼-20 socket head capscrews
(with supplied washers) securing the operator
mounting bracket.
CAUTION
For light duty or hollow-core doors with insufficient top
rail blocking, the provided through-bolts or sex nuts and
bolts must be used to securely attach the operator
mounting bracket.
c. INSTALL and TIGHTEN the four(minimum) ¼-20
socket head capscrews (with supplied washers)
securing the operator mounting bracket.
a. Using a 3/8" drill, DRILL the mounting bracket
pilot holes.
b. Using the provided rivnut tool, INSTALL the ¼-
20 steel rivnuts.
a. Using a 25/64" drill, DRILL the mounting bracket
holes.
2. If the door is wood, refer to Figure 21 and
PERFORM the following:
3. ADJUST the bracket so that there is a 5/8
"
(16mm)
space between the top of the bracket and the top
of the door.
4. TIGHTEN the socket head capscrews securing the
mounting bracket to the door.
5. Using a 7/16
"
box wrench or large adjustable
wrench, TIGHTEN the operator mounting pins into
the upper threaded holes in the mounting bracket.
Operator And Door Arm Installation Instructions - Pull Side Applications
7
Figure 21
700002-Rev N 09/18
®
5800 ADAEZ PRO
Installation and Operation Instructions
25 of 50
Installing the Operator Mounting Bracket and Cover
