Miscellaneous Common Insructions
8
700002-Rev N 09/18
®
5800 ADAEZ PRO
Installation and Operation Instructions
33 of 50
• The red LED shall illuminate to indicate that
the battery pack is fully drained and the door
operator will not function in the automatic
mode.
• The yellow LED shall illuminate to indicate that
the battery is partially drained.
1. Refer To Figure 3, and PRESS and HOLD the
battery switch in the “OPTION” position. The
following shall occur:
• The green LED shall illuminate to indicate that
the battery pack is fully charged.
Checking Battery Voltage
a. INSERT 3/16
"
hex wrench into spring tension
setscrew.
1. Manually OPEN AND CLOSE the door several
times. ENSURE that the door opens and closes
smoothly.
• If the door feels too heavy, using 3/16
"
hex
wrench, TURN the setscrew in the end of
the operator
counterclockwise to
decrease
spring tension.
NOTE:
The doors are shipped with spring tension set
to one half of the maximum spring tension.
2. If the spring tension needs to be adjusted, refer to
Figure 32, and ADJUST door-open spring tension
as follows:
• If the door feels too light, using the 3/16
"
hex wrench, TURN the setscrew in the end
of the operator
clockwise to increase
spring tension.
Adjusting Door Spring Tension
Figure 34
NOTE: CLOCKWISE
ROTATION INCREASES
SPRING TENSION
