1. REMOVE the two capscrews securing the operator
bottom cover to the operator.
2. REMOVE the bottom cover from the operator.
4. REMOVE the dress cover from the operator.
5. INSTALL and TIGHTEN the two ¼-20 X 1½" socket
head capscrews securing the operator to the
operator mounting pins.
WARNING
To avoid inadvertent activation of the operator during
connection of the door arm, the battery pack should not
be installed until after the door arm is connected.
Refer to Figure 22, and, with the battery pack facing
the jamb, POSITION the operator onto the operator
mounting pins. ENSURE operator does not slide off the
mounting pins.
3. SLIDE the battery pack from the operator and
REMOVE the battery pack.
Operator And Door Arm Installation Instructions - Pull Side Applications
7
Figure 22
700002-Rev N 09/18
®
5800 ADAEZ PRO
Installation and Operation Instructions
26 of 50
Installing the Door Operator
