1. If the door frame is steel or aluminum and rivnuts
must be installed, refer to Figure 20 and
PERFORM the following:
a. Using a 5/32
"
drill, DRILL the door arm pivot
bracket pilot holes.
2. If the door frame is wood, refer to Figure 18 and
PERFORM the following:
a. Using a 25/64
"
drill, DRILL the door arm pivot
bracket holes.
c. INSTALL and TIGHTEN the two (minimum) ¾
"
socket head capscrews (with black oxide
washers) securing the door arm pivot bracket to
the underside and face of the frame header.
b. INSTALL and TIGHTEN the three #14 x 1-¼"
wood screws (minimum) securing the door arm
pivot bracket to the underside and face of the
frame header.
b. Using a rivnut tool, INSTALL the ¼-20 steel
rivnuts.
Operator And Door Arm Installation Instructions - Pull Side Applications
7
Figure 20
700002-Rev N 09/18
®
5800 ADAEZ PRO
Installation and Operation Instructions
24 of 50
Mounting the Door Shoe
