ASP Sterrad 100NX, User Manual

Page: 94 / 110

9
Access Levels and Supervisor Tasks
92 STERRAD ® 100NX ® User’s Guide
Figure 49. Upload User Data.
If the user data shown is acceptable, touch Confirm . The following section
contains information on uploading user data.
Steps to Upload a User Database
To upload a list of user identifications and passwords, perform the
following steps:
1 Create an ASCII text file called “ users.rec ” that contains the user
identifications, passwords, and access levels. Use Microsoft Notepad to
create the entry. Save the file as “users.rec” and in the “Encoding” drop
down menu in Notepad Save, select UTF-8. Each entry should be
separated by a comma only (no spaces). Example:
USERNAME1,PASSWORD1,ACCESS-LEVEL1
USERNAME2,PASSWORD2,ACCESS-LEVEL2
where:

USERNAME must be alpha-numeric, no more than 10 characters

PASSWORD must be alpha-numeric, no more than 10 characters

ACCESS-LEVEL must be either 1, 2 (1=Operator, 2 = Supervisor)
2. Copy users.rec file to a USB memory stick and insert the memory
stick into the sterilizer’s port located on the lower right (your right)
side of the sterilizer.
DRAFT