ASP Sterrad 100NX, User Manual

Page: 52 / 110

5
Troubleshooting
50 STERRAD ® 100NX ® User’s Guide
System Message Table
Temperature Messages
WARNING! HOT SURFACES.
When a temperature message is displayed, this may mean that the interior of the
sterilizer may be very hot. Do not touch the inside of the chamber, electrode, or
doors with your bare or gloved hands. Allow the sterilizer to cool before touching
interior surfaces.
A number of displayed messages concern the temperature of the
system; e.g., doors, vaporizer, electrode, etc. These messages contain
the word “temperature” and require that you run the temperature test in
diagnostics. If the temperature test fails, or if the message is repeated,
call your ASP Representative for further action.
Messages Not In This Table
If a displayed message is not found in the following table, there is no remedy
available that you may safely perform. Call your ASP Representative for
further action.
If this message appears. . . Do this . . .
Cannot Dispose Cassette,
Run Diagnostics The cassette did not drop into the disposal box. Remove the load
and run diagnostics.
Cannot Eject Cassette, Run Diagnostics The cassette did not eject out the cassette slot. Remove the load
and run diagnostics.
Cassette Accepted, Positioning No action required.
Cassette Detected, Verifying No action required.
Cassette Did Not Index A cassette was unable to advance to the next cell. Remove the
load and run diagnostics.
Cassette Expired, Disposing Cassette Insert a new cassette.
Cassette Expiry Found During
Start Cycle The cassette was found to be expired when the Start Cycle
button was pressed. Dispose of the cassette and insert new
cassette.
Cassette Out Of Date,
Disposing Cassette The cassette has been in the sterilizer for 10 days or the cassette
has expired. Insert new cassette.
DRAFT