13
5. Plug-on modules
All sockets on the ATC 100 are particularly intended
for the described plug-on modules. The inserting of
other plug-on modules can damage or destroy the
ATC 100 controller as well as the plug-on modules.
The plug-on modules may be inserted and/or taken
off only in switched off condition of the control. The
respective plug-on modules can be only inserted
on the appropriate socket of the ATC 100 and only
in one direction. Taking off a plug-on module from
it's socket is facilitated by mutual tilting of the
appropriate module.
5.1 Control module
The pluggable control module serves the parametrization,
the visualization of the control sequences and the
diagnosis in case of an error.
The controller can be operated either with or without the
control module. The operability of the controller is
identical in both cases. With this the pluggable control
module offers an effective protection from manipulation
or unauthorized access.
The function range of the controller is not limited by the
missing control module.
5.2 Additional modules (optionally available)
Please pay attention to the individual
documentations of the additional modules.
5.2.1 Inductive safety system ISK 70-75
With the additional module ISK 70-75 (sliding gate
application) up to two travelling safety contact edge
circuits can be connected and monitored direction
depending. These safety contact edges at the gate wing
are monitored by the inductive safety system wearout-
free and without mechanical stress. The contact edge
working against the direction has no influence to the pro-
gram sequence. The semiconductor outputs are linked
with the soft- and hardware of the control.
The installation on a sliding gate
application without ISK-system may only
be used on gate-systems which have
their own and to the latest standards confirming
safety devices. Gate systems without safety
devices may only operated in manual mode to
prevent severe injuries.
The liability of the manufacturer is terminated
with neglect or deliberate abuse.
5.2.2 Time switch ZU 3
With the integration of the pluggable time switch a day-
dependent automation of the gate system is possible.
The time switch contains the following functions:
•
Up to 8 program sequences per day (Rush-Hour)
•
Program sequences can be copied to different days
•
smallest switching time is 1 minute
•
Digital display of clock-time and weekdays
•
Summer-/winter time conversion alternatively by hand
or automatically
5.2.3 Radio control
The single-channel radio controller works with 433MHz.
Depending of the settings
"Impuls"
, the radio-impulse
initializes the instruction sequence "Open-Stop- Close-
Stop ..." resp. "Open,Close,Open ...". In the end positions
of the gate the radio impulse will initiate the corresponding
moving of the gate.
•
Adjusting the radio receiver
- Set the DIP-switch of the radio receiver to individual
code
- Select the key allocation of the receiver:
1-Instruction hand-transmitter:
insert jumper J1 und J2
2-Instruction hand-transmitter:
insert only jumper J2
→
→
→
→
→
first (left) key selected
insert only jumper J1
→
→
→
→
→
second (right) key selected
3-Instruction hand-transmitter:
insert jumper J1 and J2
→
→
→
→
→
first key selected
insert only jumper J2
→
→
→
→
→
second key selected
only jumper J1 inserted
→
→
→
→
→
third key selected
4-Instruction hand-transmitter:
insert jumper J1and J2
→
→
→
→
→
first key selected
only jumper J2 inserted
→
→
→
→
→
second key selected
only jumper J1 inserted
→
→
→
→
→
third key selected
no jumper inserted
→
→
→
→
→
fourth key selected
•
Adjusting the hand transmitter
- Adjust the DIP-switch of the hand-transmitter
accordingly to the settings of the radio-receiver.
Summary of Contents for 302030
Page 19: ...19 ...
