ASM Polytouch HYDRASYNTH EXPLORER Owner'S Manual Download Page 59

Page: 59 / 86

The Macro button is exclusive; when it is engaged the Control knob is locked out temporarily.

This allows you to change the Control knob “behind the scenes”, so that the new Macro value is

revealed after disengaging the Macro button.

name the Macro

Macros can be given a name with up to 8

characters, so you’ll know at a glance what the

Macro does. The name is displayed on the Home

page and on the Macro Assign page. Here’s what

to do:

1. From the Home page, press [MACRO

ASSIGN].

2. Select the Macro you want to edit by

pressing its Control button.

3. Hold [SHIFT] and press the Page down

arrow to reach page 9.

4. Control knob 1 selects the naming function:

List name or Custom name.

5. list name: Use Control knob 2 to choose

a preset name. There are 100+ of them;

see

Preset Macro Name List (p. 60)

at the

bottom of this chapter.

6. custom name: Control knob 2 chooses

characters; use Control button 2 to select

the next character.

Save the patch: Macro Options

The [SAVE] button has its own chapter, but we want point out this part of it now. While saving the patch,

Control knob 1 of Save page 2 lets you specify whether the current positions of the Macro knobs will be

returned to zero (Return), stored in their current positions (Save), or converted into new values for the

parameters they control (Convert). For more information see

Patch Management (p. 66)

Macro Button response

There’s a separate chapter for

The System Setup Pages (p. 70)

, but this information affects how the

Macro buttons behave on the Home page and while auditioning a Macro during editing.
To access the Macro Button settings, press [SYSTEM SETUP] and press the Page Down arrow twice to

reach page 3. Use Control knob 4 to select one of the four options: Toggle, Trigger, Switch, and Reset.

• Toggle: The Macro button toggles between

the Button Value setting and the current

Control knob value.

• Trigger: The Macro button triggers the

Button Value On when pressed and Off when

released.

• Switch: Only one Macro button can be

selected at a time.

• reset: The Macro button resets the corre-

sponding Macro Knob to zero

Using a Macro button on the Home page while holding [SHIFT] changes the behavior.

When MacroBtn setting is...

[ShifT] + Macro button response is...

Toggle

Trigger the Button Value On when pressed and Off when released.

Trigger

Hold the Button Value setting until released manually

Switch

Allow more than one Macro Button to be selected

Reset

(no response)

Summary of Contents for Polytouch HYDRASYNTH EXPLORER























































































Search results

Summary of Contents for Polytouch HYDRASYNTH EXPLORER

Reviews:

Related manuals for Polytouch HYDRASYNTH EXPLORER

Brands by name

Popular brands

ASM Polytouch HYDRASYNTH EXPLORER, Owner'S Manual

Search results

Summary of Contents for Polytouch HYDRASYNTH EXPLORER

Reviews:

Related manuals for Polytouch HYDRASYNTH EXPLORER

Brands by name

Popular brands