manualshive.com logo in svg

ASM Polytouch HYDRASYNTH EXPLORER, Owner'S Manual

Share
Download
ASM Polytouch HYDRASYNTH EXPLORER Owner'S Manual Download Page 24

24

The OScillaTOr GrOup

Oscillators are the foundation of a patch. They generate the most basic component of the sound, which 

is then shaped by other components such as Mutants, Filters, Envelopes, etc.
Hydrasynth Explorer has 3 oscillators per voice. Oscillators 1 and 2 can operate in two different modes: 

Single and WaveScan. Oscillator 3 operates only in Single mode. The same waveforms are available in 

both modes, but the features of each mode are very different.
The Mutant modules affect an oscillator the same way a mask or lipstick affect a face: they change the 

way the underlying component is presented to the world. The Ring-Noise module does a similar thing: 

it produces a sound based on the sum and the difference of two input signals.
The Oscillator, Mutant, and Ring-Noise modules form the Oscillator group. We’ll cover them all in this 

chapter.

Settings can be copied between identical modules (Osc 1 and 2, Mutants 1-4): Hold [SAVE], 

press and release the source, and then press and release the destination. Then release [SAVE]. 

Oscillators 1 and 2

The features of these oscillators are identical, so the following descriptions apply to both. For a list of 

the available waveforms see the 

Waveform List (p. 30)

 at the end of this chapter.

Switching modes

To change an oscillator from Single mode to WaveScan mode or vice versa, access [OSC 1] or [OSC 2] 

and use Control knob 1. 

Single mode

Single mode provides only a single waveform to the sound, hence the name. There’s a lot you can do 

with a single waveform, though: the Mutant modules and the Ring Modulator make sure of that.
Single mode has one page of parameters. 

page control parameter range

Description

1

1

Mode

Single, WaveScan

Select the oscillator mode

1

2

Semi

+/- 36 semitones

Coarse tuning of oscillator pitch [1]

1

3

Wave 

219 options [2]

Choose a waveform as the starting point

1

4

Cents

+/- 50 cents

Fine tuning of oscillator pitch

2

3

Keytrack

0–200%

Sets keyboard pitch tracking. [3]

[1] Use [SHIFT] to jump by 12 semitones. 
[2] See 

Waveform List (p. 30)

 

[3] 0 = fixed pitch; at 200% a 1-octave difference on the keyboard changes the pitch by 2 octaves. 

Default = 100%.

Summary of Contents for Polytouch HYDRASYNTH EXPLORER























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands