ASM Polytouch HYDRASYNTH EXPLORER Owner'S Manual Download Page 86

Page: 86 / 86

DeclaraTiOn Of cOnfOrMiTy

uSa

Important Notice:

DO NOT MODIFY THE UNIT!
This product, when installed as indicate in the in-

structions contained in this manual, meets FCC re-

quirements. Modifications not expressly approved

by Ashun Sound Machines could void your FCC

authorization to use this product in the USA.
IMPORTANT: When connecting this product to

accessories and/or another product, use only

high-quality shielded cables. The cable(s) supplied

with this product MUST be used. Follow all instal-

lation instructions. Failure to follow instructions

could void your FCC authorization to use this

product in the USA.
NOTE: This product has been tested and found to

comply with the limit for a Class B Digital device,

pursuant to Part 15 of the FCC rules. These limits

are designed to provide a reasonable protection

against harmful interference in a residential

environment. This equipment generates, uses, and

may radiate radio frequency energy and, if not

installed and used in accordance with the instruc-

tions, may cause interferences harmful to the

operation to other electronic devices. Compliance

with FCC regulations does not guarantee that

interference will not occur in a particular instal-

lation. If this equipment does cause harmful

interference, which can be determined by turning

the equipment off and on, please try to correct

the interference by one or more of the following

measures:

• Relocate either this product or the device that

is affected by the interference.

• Use power outlets that are on different branch

(circuit breaker or fuse) circuits or install AC

line filter(s).

• In the case of radio or TV interference, relocate

and/or reorient the antenna. If the antenna

lead-in is a 300 ohm ribbon lead, change the

lead-in to the coaxial cable.

• If these corrective measures do not achieve

satisfactory results, please consult the dealer

or an experienced radio/TV technician for help.

The above statements apply ONLY to those

products distributed in the USA.

canaDa

NOTICE: This class B digital apparatus meets all

the requirements of the Canadian Interference-

Causing Equipment Regulation.

AVIS: Cet appareil numérique de la classe B

respecte toutes les exigences du Règlement sur le

matériel brouilleur du Canada.

eurOpe

This product complies with the requirements of

European Directive 89/336/EEC
This product may not work correctly as a result of

electro-static discharge. If that happens, simply

restart the product.

Summary of Contents for Polytouch HYDRASYNTH EXPLORER























































































Search results

Summary of Contents for Polytouch HYDRASYNTH EXPLORER

Reviews:

Related manuals for Polytouch HYDRASYNTH EXPLORER

Brands by name

Popular brands

ASM Polytouch HYDRASYNTH EXPLORER, Owner'S Manual

Search results

Summary of Contents for Polytouch HYDRASYNTH EXPLORER

Reviews:

Related manuals for Polytouch HYDRASYNTH EXPLORER

Brands by name

Popular brands