manualshive.com logo in svg

ASM Polytouch HYDRASYNTH EXPLORER, Owner'S Manual

Share
Download
ASM Polytouch HYDRASYNTH EXPLORER Owner'S Manual Download Page 13

13

There are words in orange letters under two of the buttons: EDIT and SUSTAIN. These are used with 

the [SHIFT] button to access their secondary functions. We’ll describe those and the other arpeggiator 

features in 

The Arpeggiator Section (p. 55)

.  

Tweaking the sounds

The Right display provides information about what is happening and what the options are, no matter 

what you’re doing with the Hydrasynth. We’ll dig down into every parameter eventually, but for now 

let’s start at the top again. So please press [HOME] to make sure you’re seeing what we’re describing.

The Home page: Macro City

When Hydrasynth Explorer is on the Home page 

the Control knobs and Control buttons become 

modulation sources for the Macros. Each Macro 

can alter as many as eight parameters at one time 

by activating a single control. Every patch has 

eight Macros available.
Macros allow you to achieve complex results, but 

they’re easy to create. When you’re ready to try 

that, see 

Mastering the Macros (p. 58)

.

The rest of the Master Control section has buttons 

that will be useful in the near future. We’ll cover 

them in 

Master Control Section (p. 17)

. 

The Filter section

This section has two buttons and three knobs. The 

buttons select which of the two filters the knobs 

will control, after which the knobs can do their 

thing.
Knobs 1 and 2 are the same for either filter: they 

control Cutoff and Resonance, respectively. If Filter 

1 is selected the third knob controls the Drive 

amount for that filter; if Filter 2 is selected the third 

knob allows you to “morph” the characteristics of 

that filter.
Those descriptions barely scratch the surface, 

though. To delve more deeply into what the 

Hydrasynth Explorer filters can do, read 

The Filters 

and their Controls (p. 33)

. 

Saving

In the process of tweaking a sound you will often create something you’d like to keep. If that has already 

happened, jump ahead to the Patch Management chapter and follow the instructions in 

Save the Patch 

(p. 67)

. 

check for updates

Be sure to visit 

www.AshunSoundMachines.com

 soon, and often! It’s your source for important things 

such as:

• Firmware updates for your Hydrasynth 

Explorer

• An interactive version of this manual
• Banks of new patches from our top-notch 

sound design team

• Tutorial videos to help you master the 

intricacies of the Hydrasynth Explorer

• The original factory banks
• Our free patch librarian, Hydrasynth Manager
• ...and more!

That’s enough reading for now.

We’ve covered the basics. Now let your creativity go wild!

Summary of Contents for Polytouch HYDRASYNTH EXPLORER























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands