manualshive.com logo in svg

ASM Polytouch HYDRASYNTH EXPLORER, Owner'S Manual

Share
Download
ASM Polytouch HYDRASYNTH EXPLORER Owner'S Manual Download Page 12

12

uSB

Hydrasynth Explorer is a USB class-compliant 

device, so there are no drivers to install. Just plug 

it into your computer and it will be available 

immediately as a MIDI input/output device. 

MiDi

The Hydrasynth Explorer has two 5-pin MIDI 

connectors to allow you to interface with other 

MIDI devices. MIDI Out sends data from the 

Hydrasynth Explorer and MIDI In receives data 

from other MIDI devices. 

cV/Gate

Your Hydrasynth Explorer has a row of connectors 

that are used to interface with modular synthesiz-

ers. Each one can be configured to match the 

voltages and signal types of the most popular 

formats. For details, see 

The CV / Gate Section (p. 

64)

.  

Make Some noise!

By now you’ve already played the instrument and tweaked the controls. Now let’s take a quick tour of 

some of the main features.
To get started, press the Home button. This will exit any page and take the Hydrasynth Explorer to the 

top level of the patch.

Select patches

There are several ways to explore the patch banks 

inside the Hydrasynth Explorer. The simplest 

way is to turn the Patch knob (the big one in the 

middle). This will move you through the bank one 

patch at a time. You’ll see the patch name, bank, 

and number in the Left display.
You can also hold [SHIFT] and turn the Patch knob 

to jump between the banks. This can save a lot 

of scrolling if you know the location of the patch 

you’re looking for.
The Browse button opens the patch browser in 

the Right display. You’ll want to read the section 

Using the Browser (p. 66)

 to learn about things 

like Categories, Favorites, and other search 

techniques.

Octave shift

If you want to hear a sound in a higher or lower 

range than the keys currently reach, you can shift 

the range quickly by one or more octaves. The 

Hydrasynth Explorer keyboard has dedicated 

buttons above the pitch/mod strips that flash 

faster as the range moves further from center; at 

maximum shift the buttons are lit solid. To reset 

the range, press both buttons.

arpeggiator basics

Arpeggiators can turn a great sound into a whole performance! So when you’re ready, press the 

Arpeggiator [ON] button to activate the arpeggiator. Then hold down two or more keys while experi-

menting with the other controls in the Arpeggiator section. Here’s a quick description of each.

control

function

Mode

Determines the arpeggiator direction and other behaviors.

Octave

Sets the range of the arpeggiator.

Division

Selects the basic time division of the arpeggiator relative to the tempo.

Swing

Eight settings allow you to add a certain amount of “shuffle feel” to the arpeggio.

On

This toggles the arpeggiator on and off. Use it with [SHIFT] to enter Edit mode.

Latch

Lets you to take your fingers off the keys and use both hands to adjust parameters. It 

works whether an arpeggio is running or not.

Triplet

Subdivides the selected Division setting into triplets.

Tap Tempo

Tap several times to set the tempo.

Summary of Contents for Polytouch HYDRASYNTH EXPLORER























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands