ASM Polytouch HYDRASYNTH EXPLORER Owner'S Manual Download Page 31

Page: 31 / 86

The Mixer MODule

This module has six pages of parameters which perform simple but important functions.

Mixer parameters: pages 1-2

page control parameter range

Description

Osc 1

0-128

Osc 1 level

Osc 2

0-128

Osc 2 level

Osc 3

0-128

Osc 3 level

Solo

On/Off

First press: all 5 sources are active. Use Control buttons to solo

a source. [1]

Ring

0-128

Ring mod level

Noise

0-128

Noise level

Solo

On/Off

First press: all 5 sources are active. Use Control buttons to solo

a source. [1]

[1] Pages 1 and 2 share this parameter; changing one also changes the other.

Setting levels

To set the relative levels of the sources, access [MIXER]. Page 1 contains the levels for Oscillators 1-3, and

the levels for Ring and Noise are on page 2. Use the appropriate Control knob to adjust the level of each

item, and use [SHIFT] + Control knob X to fine-tune the level.

The Solo function

When creating a patch you may want to hear one of the sources on its own while making adjustments

to that source. Rather than setting the other levels to zero temporarily and restoring them later,

Hydrasynth Explorer includes a Solo function.
It’s easy to use:

• On pages 1 and 2, use Control button 4 to toggle Solo from Off to On. Those pages share this

parameter, so changing it on one page changes it on the other.

• When Solo is engaged the Control buttons for all 5 sources will light on their respective pages. This

means they are still active.

• Press the Control button of the source you want to hear. Its Control button will become brighter

than the others.

• Press another Control button to solo that source. The first Control button will dim and the selected

one will brighten.

• You can switch between pages 1 and 2 and solo any one source on either page.
• Press Control button 4 on either page 1 or 2 to defeat the Solo function.

Mixer parameters: pages 3-4

page control parameter range Description

Osc 1 pan

-/+ 64

(as named)

Osc 2 pan

-/+ 64

(as named)

Osc 3 pan

-/+ 64

(as named)

Ring pan

-/+ 64

(as named)

Noise pan

-/+ 64

(as named)

Summary of Contents for Polytouch HYDRASYNTH EXPLORER























































































Search results

Summary of Contents for Polytouch HYDRASYNTH EXPLORER

Reviews:

Related manuals for Polytouch HYDRASYNTH EXPLORER

Brands by name

Popular brands

ASM Polytouch HYDRASYNTH EXPLORER, Owner'S Manual

Search results

Summary of Contents for Polytouch HYDRASYNTH EXPLORER

Reviews:

Related manuals for Polytouch HYDRASYNTH EXPLORER

Brands by name

Popular brands