manualshive.com logo in svg

ashtech ZY-12, Information Supplement

Share
Download
ashtech ZY-12 Information Supplement Download Page 7

General Information

 1

 1

General Information

This manual describes the features of the ZY-12 GPS receiver, Figure 1.1, telling you 
how to set up the receiver, how to collect data, and how the receiver operates. Many 
field procedures, such as kinematic surveying, are also described.  

The ZY-12 GPS receiver, making full use of the Navstar Global Positioning System, 
provides state-of-the-art precision surveying and navigation. The ZY-12 is the first to 
offer true all-in-view automatic tracking. With 12 independent channels, it 
automatically tracks all the satellites in view, eliminating the need for manual, 
programmed, or pre-programmed selection of common satellites between survey 
sites.

The system includes a microstrip antenna mounted on a precision machined platform 
for accurate positioning above the survey mark. 

 Figure 1.1. 

ZY-12 Receiver

Summary of Contents for ZY-12

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands