manualshive.com logo in svg

ashtech ZY-12, Information Supplement

Share
Download
ashtech ZY-12 Information Supplement Download Page 20

14

ZY-12 GPS Receiver

This command updates some parameters to their default values and does not 
clear the complete internal RAM. 

Resetting Memory

A reset of the 

internal memory

 clears the receiver to the factory defaults, 

including almanac and ephemeris data. To reset memory:

1.

Turn the receiver off. 

2.

While pressing the up arrow key, turn the receiver on.

3.

Keep pressing the 

up

 arrow until the message 

"Test of internal RAM. Will 

clear all data. Press YES within 10 seconds to continue"

 displays. 

4.

Press 

[8]

 (YES), and the message 

"Push any key to continue"

 should 

appear shortly. Press any key to continue with receiver normal operation. 

A reset of the 

external memory

 of the receiver erases all data files displayed on 

Screen 8 and stored in the memory. To complete this reset:

1.

Turn the receiver off. 

2.

While pressing the right arrow key, turn the receiver on. 

3.

Keep pressing the 

right

 arrow until the message 

"Test of external RAM. Will 

clear all data. Press YES within 10 seconds to continue"

 displays. 

4.

Press 

[8]

 (YES), and the message 

"Push any key to continue"

 should 

appear after several seconds. Press any key. The receiver is now ready for 
use. 

Creating a File

Each time the receiver is turned on, a new file is created. The name is the site 
name that was entered last. This name is preserved when the power is turned off. 
The receiver can store up to 100 files.

Upon tracking a minimum of three satellites, data records in the last file shown on 
Screen 8. 

If more than 10 files are in memory, files are stored on a different "page" of the 
screen. To scroll through the pages of files, press the up and down arrows. When 
the memory is full, the receiver stops recording. Previously recorded data are not 
overwritten or lost.

Summary of Contents for ZY-12

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands