manualshive.com logo in svg

ashtech ZY-12, Information Supplement

Share
Download
ashtech ZY-12 Information Supplement Download Page 32

26

ZY-12 GPS Receiver

 Table 3.5. 

Screen 2 - Page 2 Parameters  

Parameter

Description

SPEED

Speed over ground (SOG) parameter displayed in its E (east), N (north), 
and U (up) (ENU) components. 

TO

Displays the TO waypoint, giving its number and name. The waypoint is 
specified on Screen 6, Waypoint Control. 

DTD

Distance-to-destination is the distance from your present position to the 
waypoint.

CTD

Course-to-destination is the course to follow from your present position 
to the TO waypoint displayed in either true degrees (°Tr) or magnetic 
(ºMg). 

TD

Time-to-destination is given in hours and minutes (labeled H:M) to the 
TO waypoint, based on the present SOG.

XTE

Cross-track error indicates deviation from the track between the FROM 
waypoint and the TO waypoint where R indicates you are right of the 
track and L indicates you are left of it. The deviation is labeled in 
kilometers (KM) or miles (MI).

>>>>>+<<<<<

A visual representation of the direction in which to proceed in order to 
get back on track to the next TO waypoint. This example indicates you 
take a heading more to the right.

Summary of Contents for ZY-12

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands