12
ZY-12 GPS Receiver
9.
When it is time to conclude data collection, turn off the receiver by setting the
ON/OFF switch on the rear panel to OFF. The receiver automatically saves
the collected data, and closes the data file.
Receiver Configuration
To check the factory installed receiver configuration, go to Screen 8 (Figure 2.5).
Issue command 888 by pressing the
[e]
key, the
[8]
key three times, then the
[e]
key again. The configuration of your receiver appears on the display (Figure
2.6). You need this information when contacting Customer Support.
Figure 2.5.
Screen 8
o
Figure 2.6.
Receiver Configuration
