manualshive.com logo in svg

ashtech ZY-12, Information Supplement

Share
Download
ashtech ZY-12 Information Supplement Download Page 67

Screen Descriptions

61

Scre

en Des

c

riptions

To use this function, highlight RANGE/BEARING and press 

[e]

 (Figure 3.37).     

The display shows the route being followed. One of the legs is highlighted and the 
coordinates of the waypoints associated with this leg are being displayed in the 
next two lines. The last line shows the bearing and range values for that leg. To 
display the range and bearing for a different leg, use the left and right arrows to 
move the cursor, and the information automatically displays at the bottom of the 
screen. Press 

[e]

 or 

[c]

 to return to the main screen.

8: Unit Selection

This function allows you to specify the units (miles, knots, kilometers) used to 
display the ALT (altitude), SOG (speed over ground), DTD (distance to 
destination), and XTE (cross track error) values in Screen 2.

 Figure 3.37. 

Route Display

Summary of Contents for ZY-12

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands