manualshive.com logo in svg

ashtech ZY-12, Information Supplement

Share
Download
ashtech ZY-12 Information Supplement Download Page 49

Screen Descriptions

43

Scre

en Des

c

riptions

Use the number keys to enter values in each field. Define:

delta semi-major axis (a) or delta flattening (1/f) ellipsoid parameters 

delta x, y, z translation parameters 

To log the values and return to Screen 4, press 

[e]

. 

You can check your selection by returning to Screen 2; the label USER is visible in 
the title line. Positions output in this configuration align to the user-defined datum. 

Modem Setup Subscreen

This option lets you select the modem type and the port through which data 
transmit in remote mode. These functions are accessed by selecting MODEM on 
Screen 4 and pressing the 

[e] 

key (Figure 3.19) and detailed in Table 3.16.         

 Table 3.15. 

User Datum Parameters

Parameter

Description

DELTA-A

The difference in the length of the semi-major axis between the 
WGS-84 reference ellipsoid and the user-defined reference 
ellipsoid. 

DELTA-F

The difference in flattening parameters (1/f  × 10

4

) between the 

WGS-84 reference ellipsoid and the user-defined ellipsoid.

DELTA-X
DELTA-Y
DELTA-Z

The difference in the X, Y, and Z translation parameters between 
the WGS-84 reference ellipsoid and the user-defined ellipsoid.

 Figure 3.19. 

Modem Setup Subscreen

Summary of Contents for ZY-12

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands