25
To clear active Min/Max measurements press the ZERO key.
To exit Min/Max mode completely press the ESC key.
Note: Datalogs recorded while in Min/Max Mode will record the
real time pressure measurements at the time of writing to the
Datalog, not the min/max values. If minimum and maximum
values occur between log entries, the data will NOT be included
in the Datalog.
MENU Mode is where more sophisticated HHC functions are
programmed. Not all users will need to access all features avail-
able in MENU Mode. Some features, such as setting user name,
date and time will be done once or twice in the life of the calibra-
tor. Others such as transferring Datalogs may be used several
times per day. There are several safeguards built into the HHC to
prevent a user from accidentally changing parameters or deleting
information.
Be aware that there are functions such as erasing
Datalog memory that are permanent and cannot be restored
once they are completed.
MENU key
Enter MENU Mode by pressing the MENU key
Exit MENU Mode directly to Measurement Mode at any time by
pressing the MENU key
ESC function
During any MENU operation pressing the ESC key will prompt
the unit to step back one programming level.
ENTER function
The DATA STORE/ENTER key is a dual function key. In MENU
Mode this key is used to acknowledge and save a parameter
being programmed or selected.
UP and DOWN ARROW keys
PORT SELECT/UP ARROW and MIN/MAX/DOWN ARROW keys
are dual function keys. When in Menu Mode these keys are used
inH20
0.000
mA
–0.010
PSi
Max: 6.21
Min: –11.20
SECTION 14 l.
MIN/MAX FUNCTION CONT.
SECTION 15 a.
MENU MODE GENERAL KEY
FUNCTIONS
SECTION 15
MENU MODE FUNCTIONS
Summary of Contents for ATE-2
