Ascotel® IntelliGate® 2025/2045/2065 as of I7.9
196
Operation and Maintenance
sy
d-
020
4/1.
7
– I7.
9
– 1
2
.2009
Ascotel® IntelliGate® Net:
In an AIN every node can be individually prebarred and unlocked again.
However, only when the Master is prebarred is it displayed. The barred
state of a satellite is visible neither on the Master nor on the satellite.
As soon as there are no more active connections in the prebarred system, the sys-
tem can be taken out of operation.
Note:
Prebarring the system can be dispensed with if all concerned are aware
that existing connections will be disconnected.
6. 3. 1. 3
Disconnect system power supply
Disconnect system from the power supply. When using a UPS disconnect the bat-
tery first, then disconnect the PBX and any external Auxiliary Terminal Power Sup-
ply (ATPS) from the 230 V mains.
Hazard
Be sure to observe the
.
6. 3. 2
Licenses and EIM cards
The license information and IP address of the PBX’s Ethernet interface are stored on
the EIM card.
6. 3. 2. 1
Licences
To expand a system already in operation or to re-order a licence for a new system
(see
"Licence-related system limits", page 44
), proceed as follows:
1.
Order the licence package you want from your authorized dealer. For this, spec-
ify the system's licence information (EID, old licence code, system type). Your
dealer will then send you a new licence code.
2.
Overwrite the old licence code with the new code (see
). The new licence code is stored in the EIM.
3.
Upload the system configuration data and restart the system; the licensed func-
tion(s) is(are) now enabled.
