Ascon tecnologic KM2, Engineering Manual

Page: 31 / 40

Ascon Tecnologic - KM2 Line - ENGINEERING MANUAL -
PAG. 31
no. Param. Description
Dec.
Point
Values Default
19
o2F
Out 2 function 0
NonE Output not used;
H.rEG Heating output;
c.rEG Cooling output;
AL Alarm output;
t.out Timer output;
t.HoF Timer out -OFF in hold;
P.End Program end indicator;
P.HLd Program hold indicator;
P.uit Program wait indicator;
P.run Program run indicator;
P.Et1 Program Event 1;
P.Et2 Program Event 2;
or.bo Out-of-range or burn out indicator;
P.FAL Power failure indicator;
bo.PF Out-of-range, burn out and Power failure indicator;
St.bY Stand by status indicator;
diF.1 The output repeats the digital input 1 status;
diF.2 The output repeats the digital input 2 status;
on Out 2 always ON;
riSP Inspection request.
AL
20
o2AL
Alarms linked up with the out 2 0
0... 63:
+1 Alarm 1;
+2 Alarm 2;
+4 Alarm 3;
+8 Heater Break Down;
+16 Sensor Break;
+32 Overload on output 3.
AL1
21
o2Ac
Out 2 action 0
dir Direct action;
rEU Reverse action;
dir.r Direct with reversed LED;
ReU.r Reverse with reversed LED.
dir
22
o3F
Out 3 function 0
NonE Output not used;
H.rEG Heating output;
c.rEG Cooling output;
AL Alarm output;
t.out Timer output;
t.HoF Timer out -OFF in hold;
P.End Program end indicator;
P.HLd Program hold indicator;
P.uit Program wait indicator;
P.run Program run indicator;
P.Et1 Program Event 1;
P.Et2 Program Event 2;
or.bo Out-of-range or burn out indicator;
P.FAL Power failure indicator;
bo.PF Out-of-range, burn out and Power failure indicator;
St.bY Stand by status indicator.
AL
23
o3AL
Alarms linked up with the out 3 0
0... 63:
+1 Alarm 1;
+2 Alarm 2;
+4 Alarm 3;
+8 Heater Break Down;
+16 Sensor Break;
+32 Overload on output 3.
AL2
24
o3Ac
Out 3 action 0
dir Direct action;
rEU Reverse action;
dir.r Direct with reversed LED;
ReU.r Reverse with reversed LED.
dir