3) Cutting
• Use the Pipe Cutter or Circular Saw for cutting the workpiece. Do not gather cut workpieces
into the tank and take them out.
3-1
）
Pipe Cutter
(1)
Swing the Pipe Cutter upward to out-of-way position, turn the Rack Handle to move the Pipe
Cutter to the position for cutting the workpiece. (fig8)
(2)
The Shift Lever is adjusted to the position of 1/2-2.(to a High-Speed rotation.) (fig.9)
(3)
Move the Pipe Cutter down on to the work piece, then turn the Switch ON.
(4)
Turn the handle clockwise with a force and start cutting the workpiece. (fig.10)
(5)
Swing the Pipe Cutter upward to out-of-way position and return.
(6)
Do not gather cut pipes in the tank. Remove them from the tank.
•
Do not touch the cut surface with hands because it is hot and sharp.
•
If the Cutter Handle is turned forcibly, the cut section of piping forms an
oval shape, preventing proper threading. Turn the Cutter Handle a half turn
per one turn of the pipe.
•
Adjust the Shift Lever to the position of 1/2-2 and cut the workpieces.
15
Turn Rack handle to
the cutting position
．
〈
8
〉
Turn handle to start cutting
．
Lower
Pipe Cutter
〈
10
〉
〈
9
〉
Rack Handle
Shift Lever
Position of 1/2-2
Summary of Contents for Beaver 100
Page 35: ...34 ...
