2) Installation
(1) Put the machine in a place free from moisture.
(2) Put the machine on a flat surface without play or on a flat work bench. In this condition, the Scroll
side is higher than other parts.
（
fig.2
）
(3) Secure a sufficient space around the machine. A wide space is necessary particularly when working
long and heavy pipe.
(4) It is mandatory to use the Pipe Support for long and heavy pipe. Avoid excessive force applied to the
machine which causes it to tilt.
(5) Make sure that the power source is equipped with a ground fault circuit breaker to avoid electric
shock.
(6) Use an earth clip when a power receptacle without a base for grounding is used.
(7) When an extension cord is used, use the one conforming to the applicable regulations.
12
•
Always ground the machine to avoid electric shock and resultant
death.
•
An extension cord used should be a three-core cabtyre cable having
an earth wire. Use a thick and durable cable for outdoor application.
•
Never install an earth on the gas pipe. Explosion may take place.
•
Do not put the machine with the Die-Head side higher than other parts.
•
Threading oil leaks from the inside of pipe, staining the floor.
•
Do not use the machine in rain or outdoors. Die-Head or Dies will rust.
High
Low
〈
2
〉
Scroll Side
Summary of Contents for Beaver 100
Page 35: ...34 ...
