Asada Beaver 100, Instruction Manual, Page: 6 / 36

•
Do not put the machine or workpiece on the Power Cord. Damaged
cord and current leakage will occur.
•
Watch the position of your finger while lowering Die-Head to avoid
pinching of fingers.
•
Do not leave the machine with a long workpiece set on it. You may
tumble and get hurt.
•
Securely install accessories in accordance with this manual. Otherwise,
accident or injury result.
•
Before further use of the machine, a guard or other part that is damaged
Should be carefully checked to determine that it will operate properly
and perform its intended function.
•
When the machine is carried with threading oil in it, the oil may splash
and stain clothing due to vibration.
•
If you have dropped or hit the machine accidentally, carefully check for
damage, crack or deformation. If the machine is used with such defect,
poor threading accuracy, accident and injury can result.
•
Before leaving the machine for a long time, disconnect the Power Plug.
•
Work wet with threading oil is slippery. Do not drop it on your feet.
•
Always use the threading oil (White) for working water pipes. When
the threading oil (White) is used, wash it off with water. When the
threading oil (Red) is used, wipe it off with waste cloth. Avoid cutting
your hands with threads and cut surfaces.
•
The carriage contacts the body before the work is threaded and the
Die-Head feeding stops. Start threading at a position 90 mm or more
away from the Hammer Chuck.
Instruction Manual
5
Electric Shock
Pinching
Falling
Other