Arturia ARP2600 V, User Manual

Page: 76 / 95

74 ARTURIA – ARP2600 V – USER’S MANUAL
Let’s again use the “bass1” sound as template for the following preset:
•
two oscillators (VCO1 and 2)
•
a low pass filter (VCF)
•
an amplifier (VCA)
•
the tracking generator connected to the filter
We will first see how to create a “complex LFO” modulation type on the filter cut-off frequency
with the help of the tracking generator.
On the tracking generator module (situated on the bottom right of the synthesizer section),
click on the “open tracking” button under this grid to open it. Then, connect the output of the
first tracking line ( “out”) to the “VCO2 Sin” modulation input of the filter.
open the tracking grid...
... then, connect the output of the first tracking line to the filter modulation input
Raise the potentiometer above the modulation input jack. This is the modulation rate.
the modulation rate