Arturia ARP2600 V, User Manual

Page: 48 / 95

46 ARTURIA – ARP2600 V – USER’S MANUAL
the electronic switch
An example:
Connect the output of the square wave form of oscillator 1 to input A and the sine output of
oscillator 2 to input B.
Place these two oscillators to low frequency position (LF) so as to slow the oscillation speed. Set
the frequency potentiometers for the two oscillators to 0.3 Hz.
Connect output C of the interrupter to one of the filter modulation inputs.
Set the Sample and Hold clock speed potentiometer towards the bottom to clearly hear the
alternation between the two modulations.
Inputs (A / B) : Audio or modulation signal input connection jacks.
Selector switch (C) : Selector switch C connection jacks between signals A and
B
External clock input (Ext clock In) : External; clock connection jacks (pre-cabled to the Sample
and Hold clock)
5.1.10 Envelope follower
The envelope follower allows the generation of a modulation from an external (or internal) source
of audio signal. The (Pre amp.) volume parameter sets the fineness of the envelope follow. The
lower it is, the more closely the variations of the input signal will be followed.
the preamplifier