Arturia ARP2600 V, User Manual

Page: 45 / 95

ARTURIA – ARP2600 V – USER’S MANUAL 43
5.1.4.2 AR
Attack (Attack time) : Sets the attack time
Release (Release time) : Sets the release time
5.1.4.3 Trigger modes
Trigg input (S/H gate) : Input connection for an external trigger
signal (pre-cabled to the Sample and Hold
clock)
“Gate” output type (Gate) : Output connection for a “gate” type sig-
nal: for every note played on the keyboard,
the signal remains active as long as the note
is held down.
“Trigger” output type (trig) : Output connection for a “trigger” type
signal: each note played by the keyboard
presents a sustain time reduced to the
minimum.
Switch “trigger by Sample and Hold clock” (S/H gate): Selection of the choice of envelope trigger
- AR and ADSR – by the keyboard or Sample
and Hold clock. This function reactivates
the envelopes at every clock cycle.
5.1.5 Output amplifiers (Voltage Control Amplifier - VCA)
The amplifier is the last step in the conception of a preset. It sets the general volume of the sound.
the VCA settings
This module is very simple; it contains:
Gain (Initial Gain) : Sets the general synthesizer volume
Audio input (Audio VCF / ring mod) : Audio input connection jack (pre-cabled to the filter and
ring mod audio outputs).