Arturia ARP2600 V, User Manual

Page: 46 / 95

44 ARTURIA – ARP2600 V – USER’S MANUAL
Modulation inputs (Control) : Modulation input connection jacks (pre-cabled on the AR
and ADSR envelopes).
5.1.6 Noise Generator
The noise generator generates white noise or colored noise. It possesses a low pass filter to dampen
high pitched frequencies.
the noise generator
Low pass frequency (white / Low Freq) : Sets the cut-off frequency of the low pass
filter.
Noise volume : Sets the noise volume.
Noise generator output (Noise generator output) : Noise out connection jack.
5.1.7 Voltage processor (Mixer / inverter / lag generator)
The voltage processor allows you to mix up to 8 inputs (audio or modulation) to one (or several)
outputs.
It also allows you to invert the input signal – a positive-going modulation (an envelope for example)
will thus become negative.
A lag generator allows you to smooth an input signal. For example, the square signal from a LFO
approximates a triangle the more we raise the potentiometer value, increasing the lag time.
the voltage processor
8 signal inputs (input) : Audio or modulation signal input connection jacks.
4 balance (mix) : Sets the balance between the two input signals
4 inverters (inverter) : Inverts the input signal
4 lag generators : Smoothes the input signal