Arturia ARP2600 V, User Manual

Page: 47 / 95

ARTURIA – ARP2600 V – USER’S MANUAL 45
4 signal outputs (output) : Audio or modulation signal output connection jacks
4 “Mix” switches : This switch allows you to merge one or several inputs pairs
into the one above.
4 “volume” potentiometer : potentiometer to set the volume of 2 input signals (A
and B for example)
5.1.8 Sample and Hold generator
This module lets you sample the signal connected as input. The source can be external (source of
trigger connected to the input) or pre-cabled to the noise generator. This module allows you to
create random modulations by sampling the noise signal, for example.
You can also connect an external clock source to pilot the sample and hold speed (the wave form
output of an oscillator for example).
the sample and hold settings
Level (Level) : Sets the Sample & Hold modulation level.
Rate (Rate) : Sets the Sample & Hold clock speed.
External Input (“Noise gen”) : Audio or modulation external signal input connection jack.
(pre-cabled to the noise module)
Sample and Hold output : Sample and Hold output connection jack
Internal clock output (Int Clock out) : Sample and Hold internal clock output connection jack
External clock input (Ext Clock in) : External clock input connection jack
MIDI Synchronization (MIDI sync) : Selector switch for the synchronization of the clock to a
MIDI sequencer.
5.1.9 The”electronic switch” module (Electronic switch)
The “Electronic switch” module allows you to alternate the two sources connected to inputs A and B
depending on the speed of the clock connected (pre-cabled to the Sample and Hold clock) to create
a composite source of modulation.