Arturia ARP2600 V, User Manual

Page: 51 / 95

ARTURIA – ARP2600 V – USER’S MANUAL 49
Sine tool : Tool for drawing a sinusoid.
Square tool : Tool for drawing a square signal.
Noise tool : Tool for adding noise to an existing signal.
Eraser tool : Tool for erasing an existing signal.
Undo / Redo : To undo or redo a drawn signal.
A few tips for using it:
To create an exponential curve: Firstly click on the editing screen to place the starting curve for
the curve.
Drag (without releasing) to draw the curve.
Click and drag up or down to set the amplitude.
Click once again to validate this curve.
5.1.13 Reverberation
This module lets us add reverberation to the sound.
the reverb module
Right effect level (Level) : Sets the output level for the right reverberation
Left effect level (Level) : Sets the output level for the left reverberation
Right output (Output R) : Right output connection jack (with or without re-
verberation)
Left output (Output L) : Left output connection jack (with or without re-
verberation)
Dry input right (Dry input right) : Dry right input connection jack
Dry input left (Dry input Left) : Dry left input connection jack
5.1.14 Chorus and delay effects
Chorus has three potentiometers, “Rate” “Depth” and “Dry/Wet” which allow us to respectively set
the speed, the depth and the relation between the original and modified signals.