Arturia ARP2600 V User Manual Download

Page: 37 / 95

ARTURIA – ARP2600 V – USER’S MANUAL

5 The

modules

The ARP2600 V can be separated into 3 parts: from top to bottom, the first is a cabinet dedicated to

sound programming and effects, the second concerns the ARP sequencer and the playing mode con-
figuration interface with the keyboard and LFO, and finally the third contains the keyboard.

5.1

Sound programming cabinet

5.1.1 Description

The programming section groups all modules which can be used to program sounds. It is also in this

screen where the different patches needed in the programming of a sound are made.

It is sometimes necessary to connect a module in the programming section to a module located in

the sequencer section.

The sound programming section contains:

3 oscillators, which can also be used as sources of modulation. (VCO)

1 multimode filter. (VCF)

1 amplifier (VCA)

2 envelopes dedicated to modulations

1 noise generator

1 ring modulator

1 envelope follower

1 sample and hold

2 mixers (on the filter and the VCA)

1 electronic switch

A tracking generator module

5 mixer / lag module

2 effects (chorus / delay)

Summary of Contents for ARP2600 V
































































































Search results

Summary of Contents for ARP2600 V

Reviews:

Related manuals for ARP2600 V

Brands by name

Popular brands

Arturia ARP2600 V, User Manual

Search results

Summary of Contents for ARP2600 V

Reviews:

Related manuals for ARP2600 V

Brands by name

Popular brands