Arturia ARP2600 V, User Manual

Page: 31 / 95

ARTURIA – ARP2600 V – USER’S MANUAL 29
In circular mode, click on the knob and turn around it in order to change the value of the controller.
The circular mode gives high precision in the manipulation of controls: The further the mouse goes
from the knob, the higher the precision of the setting.
4.2.4 The selectors:
The selectors (the filter mode selector for example) are manipulated like vertical potentiometers
by dragging with the mouse).
The filter “Modes” selector
4.2.5 Switches
The ARP2600 V has several types of switches. Simply click on these switches to change their state.
MIDI sync on/off switch
4.2.6 Pitch Bend
The pitch bend knob is used to change the pitch of the oscillators. Just click on the knob and move
the mouse up or down to change the pitch of your sound. The knob goes back to the center position
when the mouse is released.
The pitch bend knob
4.3 Using cables
The connection of different modules (Oscillators, Filter, VCA...) to one another broadens the possi-
bilities for sound design. The ARP2600 V owes its extraordinary possibilities for creation in a large
part to the wide range of connections possible. On the original ARP 2600, all of the connections
were done by two types of cables:
The linear mode is often more simple to use than rotation. But at the same time it cam be less pre-
cise (the precision is limited by the number of vertical pixels on the screen from which the mouse
movements are evaluated). It is possible to attain a higher level of precision by right-clicking, or
shift-click, on the potentiometer you want to control.