Art's-Way Manufacturing CATTLEMAXX 6105, Operator'S Manual

Page: 54 / 97

52 ATTACHMENTS
Figure 102 - Roll Feed With Auger Feeder Shown.
CAUTION: NEVER FORCE MATERIAL
INTO THE ROLL FEED WITH A STICK
OR WITH HANDS. BE ESPECIALLY
CAREFUL WHEN FEEDING SLICES OF
HAY, ALWAYS ALLOWING THE ROLL
FEED TO PULL THE HAY INTO THE
MILL.
The hydraulic roll feed is connected in series with
the hydraulic auger feeder. A separate flow control
valve allows separate speed control for the roll
feed. If equipped with the hydraulic roll feed only,
the flow control is on top of the hammermill. The
crank for lowering the roll feed is toward the front of
the hammermill housing. (See Figure 103).
Figure 103 - Roll Feed and Auger Feeder Flow Control
Valves.
R
OLL
F
EED
A
DJUSTMENT
Five holes are provided at the upper end of the roll
feed spring. The roll feed tension can be changed
as desired. Generally, the top hole is used for hay.
(See Figure 104)
Figure 104
– Hydraulic Roll Feed Motor.