Art's-Way Manufacturing CATTLEMAXX 6105, Operator'S Manual

Page: 32 / 97

30 OPERATION OF GRINDER MIXER
DANGER: TO PREVENT PERSONAL
INJURY:
1.
USE THE GRATE OVER THE AUGER
WHENEVER POSSIBLE
2.
KEEP HANDS AND FEET OUT OF
THE HOPPER AREA AND DO NOT
CLIMB ON OR OVER THE HOPPER
AT ANY TIME.
3.
KEEP CHILDREN AND
BYSTANDERS AWAY FROM THE
MACHINE WHILE THE MACHINE IS
IN OPERATION
Make sure the auger feeder clutch handle will stop
the auger feeder. Loosen the cable clamps to re-
adjust.
The auger feeder swing brake prevents the auger
from swinging. Tighten or loosen as desired. (See
Figure 36)
Figure 36 - Auger Feeder Swing Brake
NOTE: If a more accurate reading is desired and
the machine is equipped with an electronic scale,
DO NOT rest the auger feeder on the ground. Place
it in the desired position and set the swing brake.
Figure 37 - Auger Feeder Positioner and Spring
Adjustment (A - Spring; B - Positioner Handle; C -
Positioner Lock).
The auger feeder is shipped with a transport locking
plate (See Figure 38) that locks the positioner (See
Figure 37) in one position. If the positioner is to be
used, this plate is to be removed. But if the
positioner is not needed, this plate can be kept in
place to keep positioner from moving during
transport of the grinder mixer.
Figure 38 - Transport Locking Plate.
A
C
B