Art's-Way Manufacturing CATTLEMAXX 6105, Operator'S Manual

Page: 10 / 97

8 SAFETY GUIDELINES
H
YDRAULIC
S
AFETY
•
Make sure components in the hydraulic system
are kept clean and in good working condition.
•
Relieve pressure from the hydraulic system
before servicing or disconnecting from the tractor.
•
Keep all hydraulic lines, fittings, and couplers
tightly secured and free of leaks.
•
Replace any worn, cut, abraded, flattened or
crimpled hoses.
•
Do not make any temporary repairs to the
hydraulic lines, fittings or hoses using tape,
clamps, or cement. The hydraulic system
operates under extremely high pressure and
temporary repairs may fail suddenly and create a
hazardous and or dangerous situation.
•
Wear proper hand and eye protection when
searching for a high-pressure hydraulic leak. Use
a piece of wood or cardboard as a backstop
instead of hands to identify and isolate a leak. If
injured by a concentrated high-pressure stream
of hydraulic fluid, seek medical attention
immediately. Serious infection or toxic reaction
can develop if hydraulic fluid penetrates the
surface of the skin.
•
Before applying pressure to the system, make
sure all components are tight and that the
hydraulic lines, hoses, and couplings are not
damaged.
T
RANSPORTATION
S
AFETY
•
Make sure the grinder mixer complies with all
local regulations regarding the transportation of
equipment on public roads and highways.
•
Make sure the Slow Moving Vehicle (SMV)
emblem and all lights and reflectors required by
local highway and transportation authorities are
properly in place, clean, and clearly visible to
traffic.
•
Do not allow riders on any machinery during
transport.
•
Make sure the grinder mixer is securely attached
to the tractor and install a safety chain to the
grinder mixer.
•
Make sure the tractor brake pedals are latched
together.
•
Do not exceed 20 mph (32 km/h) when
transporting the grinder mixer. Always reduce
speed on rough roads and surfaces, or when
going down inclines.
•
Use caution when turning and always use the turn
signals on the tractor to indicate your turning
intentions to the other traffic.
•
The weight of the trailed machine should NEVER
exceed the weight of the towing vehicle.
•
Check all clearances carefully whenever the
machine is towed.
•
Lower the elevator into the transport position
before transporting the harvester on the highway.
•
Stay away from overhead obstructions and power
lines during transport. Electrocution can occur
even without direct contact.
S
TORAGE
S
AFETY
•
Store the grinder mixer in an area away from
human activity.
•
Do not permit children to play on or around the
stored machine at any time.
•
Make sure that the grinder mixer is stored in an
area with a firm and level base to prevent the
machine from tipping or sinking into the ground.
•
Block the wheels to prevent the machine from
rolling.
T
IRE
S
AFETY
•
Have only a qualified tire dealer or tire repair
service perform tire repairs.
•
Do not attempt to install a tire on a wheel or rim
unless you have the proper equipment and
experience to do the job.
•
Follow proper procedures when installing a tire on
a wheel or rim to prevent an explosion that could
result in serious injury.
•
Do not substitute tires with a lesser road rating
and/or capacity for the original equipment tires.
CAUTION: FAILURE TO FOLLOW
PROPER PROCEDURES WHEN
INSTALLING A TIRE ON A WHEEL OR
RIM CAN PRODUCE AN EXPLOSION
THAT MAY RESULT IN SERIOUS
INJURY OR DEATH. DO NOT ATTEMPT
TO INSTALL A TIRE UNLESS YOU HAVE
THE
PROPER EQUIPMENT AND
EXPERIENCE TO PERFORM THE JOB.
REPLACEMENT,
REPAIR, AND/OR
MAINTENANCE SHOULD BE DONE BY
A
QUALIFIED TIRE DEALER OR
QUALIFIED REPAIR SERVICE.
A
SSEMBLY
S
AFETY
•
Use adequate manpower to perform assembly
procedures safely.
•
Assemble the grinder mixer in an area with
sufficient space to maneuver the largest