Product Description
DualWave Arthroscopy Pump
User’s Guide
LM1-0630-EN_E
Page 9 of 43
Message
Cause
Explanation
-
Button
The TPVD displays the pressure reading until
PRESSURE (-) button is pressed. Once pressed,
the displayed pressure reading will change to
the pressure setting. Each subsequent press of
the pressure buttons will decrease the pressure
setting in increments of 5.
Pressure set decrease.
RUN Button
Button appears when the pump is stopped. Press
this button to start the pump.
Motors on.
STOP Button
Button appears when the pump is running. Press
this button to stop the pump.
Motors off.
LAVAGE Button
Button appears when the pump is in either
inflow only or inflow/outflow mode. Press the
button and the pump will increase pressure by a
user defined amount and length of time.
Pressure increased for a set
time.
RINSE Button
Button appears when the pump is in
inflow/outflow mode. Press the button and the
pump will increase outflow by a user defined
amount and length of time.
Outflow rate and pressure
increased for a set time.
BOOST Button
Button appears when the pump is in inflow only
mode. Press the button and the user may define
the pressure increase when the shaver is
activated.
Pressure increased.
CANNULA Button
Button appears when the pump is in
inflow/outflow mode. Press the button and the
user may define the outflow rate.
Outflow rate change.
SHAVER Button
Button appears when the pump is in
inflow/outflow mode. Press the button and the
user may define the outflow rate of the shaver
and pressure increase. In ASP mode the button is
red.
Shaver suction change and
pressure increase.
MENU Button
Button appears when the pump is stopped. Press
the button and the pump will enter the set-up
menu.
User setups displayed.
Summary of Contents for AR-6480
Page 2: ......
