20
20H
You will need for this page:
(QTY: 18+)
(QTY: 6+)
Assemblies from Step 1:
•
All remaining Truss
Assemblies
10632
Side Frame
2+
Step 4:
Continued for Extension Modules
10634
Side Wall
Channel
2+
6
57 1/2” (146,1 cm) behind the previous
Truss
,
erect a
Truss Assembly
and secure using a
Large
Screw
on each side. Once two
Truss Assemblies
are in place, connect them with a
Mid Side Wall Channel
and secure with
Large Screws
. Support
Trusses
until
Mid
Side Wall Channels
are in place.
LS
SB
5
All
Truss Sections
are assembled in the
same manner as the
Truss Section
just
erected. Install one additional
Side Frame
per side for each additional
Module
. Overlap
Side
Frames
by 8 1/4” (21,0 cm). Refer to page 13 to
see how many
Trusses
should be included in your
building.
One Side Frame per side is added for
each additional Extension Module.
10650
10650
10650
Install the
Main Roof Beam
and secure with two
Small Bolts and Nuts
at each end. Next, install
the outer
Roof Beams
in the same manner.
8
Remove
Bolts
holding
Truss
peaks together (from
Step 1-6). Next, place two
Middle Roof Beams
back-to-back and secure with two
Small Bolts
and Nuts
as shown. This is the
Main Roof Beam
.
7
If you are erecting a 10x10 (3,0 m x 3,1 m) building, skip this page
and move on to page 21.
10650
10650
Main Roof Beam
Side of Beams with small holes must face up.
Outer
Outer
Outer
Main
Outer
Main
Repeat until all Trusses have been installed.
Roof Beam
4+
10650
