17
You will need for this page:
Step 3: Continued
17H
Using
Small Screws
, attach a
Front Wall
Panel
and
Corner Panel
to each corner of
the
Front Wall
as shown. The
Corner Panel
should only be secured to the
Front Wall Panel
where
the
Panels
overlap. Do not secure the
Corner Panel
to the
Front Wall
itself, this will be done in Step 6. Also,
leave the holes closest to the
Door
open in the
Front
Wall Panel
. These will be used to attach the
Door
Jambs
in Step 6.
6
Slide the
Door Header Assembly
down onto
the
Front Wall Assemblies
as shown and
secure with
Small Bolts and Nuts
. Once these
pieces are joined, take care when moving them as the
Door Header
may bend.
5
(QTY: 8)
(QTY: 12)
Assemblies from previous page:
•
Left Front Wall Assembly
•
Right Front Wall Assembly
•
Door Header Assembly
LEAVE HOLE OPEN
LEAVE HOLE OPEN
LEAVE HOLE OPEN
IMPORTANT:
A minimum
of two people should be
used at all times when
handling or maneuvering
the Front Wall Assembly.
When installing the Front
Wall Assembly in the build-
ing, two people should hold
the Assembly in place until
it is secure. Failure to do so
could result in bending the
Front Frame and Fascia
pieces.
LEAVE HOLES OPEN
ALONG SIDE OF WALL
10618
Front Wall
Panel
2
10619
Corner Panel
2
Left Front Wall Assembly
Right Front Wall Assembly
SB
SB
SB
SB
SB
SB
SB
SB
10618
10618
10618
10619
10619
10619
SB
SS
SS
SS
SS
SS
SS
