35
Step 11:
Continued for Extension Modules
35H
(QTY: 32+)
Roof Panel
4+
7743
(QTY: 8+)
Continue to apply Weather Stripping.
Install two more
Roof Panels
. Continue to apply
Weather Stripping Tape
as you go.
6
Where the last two
Panels
overlap over the
Truss
, insert two
Small Bolts and Nuts
and seal
with two 2” (5,1 cm) strips of
Tape
.
7
Place strips of Tape over Bolts to seal.
You will need for this page:
Ridge Cap -
FR
1
10621
If you are erecting a 10’x10’ (3,0 m x 3,1 m) building, skip this page
and move on to page 36.
Overlap the last
Ridge Cap
installed with the next
Ridge Cap
and secure with two
Small Bolts and
Nuts
as shown.
9
DO NOT fully tighten Ridge Cap Bolts
until you have both Ridge Cap Bolts
in place. This will ease assembly. Bolts must
be fully tightened before moving on to the next
page.
Repeat the steps on this page until you have only two
Roof Panels
remaining. Before moving on to the next page, all
Ridge Caps
should be
in position, but the ends of the
Front and Rear Ridge Caps
at the front
and rear of the building should not be secured yet.
10
Ridge Cap -
Mid
0+
10680
SB
SB
SS
Install two more
Roof Panels
.
8
SB
(Under Ridge Cap)
