ARRI KK.0020233 User Manual Download Page 28

Page: 28 / 34

5.2 Sets

LMB 6x6 Clamp On 3-Stage Set

KK.0020231

The entry-level set is made up of the basic

components of the modular LMB 6x6 for

clamp-on mounting.

LMB 6x6 Basic Module

K2.0019218

LMB 6x6 Extra Non-Rotatable Filter Stage

K2.0019133

LMB 6x6 Top, Bottom Flag

K2.0019178

LMB 6x6 15 mm Studio 3-Stage Set

KK.0020232

The LMB 6x6 15 mm Studio 3-Stage Set comes

with all the components included in the LMB 6x6

Clamp-On Set, with an additional mounting for

15 mm studio rods, and a flexible rubber “donut”

which allows for use with optics of different

diameters, and stills or vintage lenses.

LMB 6x6 Basic Module

K2.0019218

LMB 6x6 Extra Non-Rotatable Filter Stage

K2.0019133

LMB 6x6 Top, Bottom Flag

K2.0019178

LMB 15 mm Studio Rod Adapter

K2.0013440

LMB 6x6 Tilt and Flex Adapter 80-156 mm

K2.0019085

5. Buy Sets & Parts

5.1 Basic

Buy Sets & Parts

LMB 6x6 Basic Module

K2.0019218

The basic module is the starting point for the

modular LMB 6x6 matte box. By just adding a

clamp adapter it offers a clip-on version which

can be extended by adding other LMB 6x6 parts.

LMB Sunshade

LMB 6x6 Backplate with Filter Guide

LMB Filter Frame 6x6/6x6 (pare)

LMB Flag Holder (pare)

K2.0013825

Mask

Summary of Contents for KK.0020233



































Search results

Summary of Contents for KK.0020233

Reviews:

Related manuals for KK.0020233

Brands by name

Popular brands

ARRI KK.0020233, User Manual

Search results

Summary of Contents for KK.0020233

Reviews:

Related manuals for KK.0020233

Brands by name

Popular brands