23
Instructions
3.13 LMB 6x6 Top, Bottom Flag
The carbon fiber Top, Bottom Flag including two extendable wings to prevent possible
image quality loss caused by stray light. It can be fitted to the top or at the bottom of
the LMB 6x6 Basic Module and will cover the opening of the sunshade 100% for best
protection during a break.
Mounting the Top, Bottom Flag
• Open the two Flag Holders slightly until a gap of around 4 mm is visible.
• Connect the top flag cut-outs to the Flag Holders.
• To mount: Lock the top flag in place by fastening the Flag Holder nut.
• To remove: Open the two Flag Holders nuts slightly and pull the top flag out.
How to use
• Unlock the top flag extensions by turning the locking knob counter-clockwise (Fig. 1).
• Bring the top flag into the right position (Fig. 2).
• Lock the top flag extensions by turning the locking knob clockwise.
Adjust Flag Friction
Top/Bottom Flag friction adjustment can be set using the flag friction knob. The flag can
be locked into position using the same knob.
Fig. 1
Fig. 2
