12
3.5 LMB 6x6 Extra Non-Rotatable Filter Stage
The Extra Non-Rotatable Filter Stage makes it possible to use an additional 6.6 inch x
6.6 inch filter. For extreme lightweight applications such as Gimbal and Steadicam the
separate single filter stage works perfectly in conjunction with any clamp, or the Tilt and
Flex Adapter. Each filter frame is secured with an extra tray catcher which holds them
perfectly in place.
To attach the LMB 6x6 Extra Non-Rotatable Filter Stage
• Before fitting the filter stage remove the rear clamp adapter.
• Open the grey screws at the left and the right side to unlock the clamp device (Fig. 1).
• Thread the Extra Non-Rotatable Filter Stage through the locking knobs (Fig. 2).
• Slide the filter stage upwards.
• Tighten the grey thumbscrews on both sides of the filter guides (Fig. 3).
If the filter stage won’t slide into the
clamp device, loosen the black screws
at the left side of the filter stage.
The 4 threads for the Sunshade from
the LMB 6x6 are integrated at the front
of the non-rotatable filter stage in order
to use the filter stage independent with
a clamp adapter at the back.
NOTICE
Instructions
Fig. 1
Fig. 2
Fig. 3
