18
3.11 LMB 6x6 Swing Away Tilt Module (19 mm / 15 mm)
This module offers a comfortable swing-away with extension for easier lens changes,
as well as an integrated tilt module that allows 10° up and down adjustments to avoid
unwanted reflections.
• Secure the Swing Away Tilt Module with the three metallic screws at the right side of
the basic module.
• For more safety, use a 3 mm hex screwdriver to tighten the screws.
Fitting the matte box on rods
• Unlock the 19 mm or 15 mm support by turning the butterfly nut counter-clockwise.
• Slide the matte box onto the rods.
• Lock both rods and the matte box by turning the butterfly nut clockwise.
Horizontal adjustment
• Unlock the two 3 mm screws at the right side of the tilt module (Fig 1).
• Adjust the matte box into the desired positioning (Fig. 2).
• Mark the position with the two screws.
• Use the marker if you want to go back to the original position.
Instructions
Fig. 1
Fig. 2