ARRI KK.0020233 User Manual Download Page 2

Page: 2 / 34

Imprint

reserved. No parts of this document may be reproduced without prior written consent of

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG. Specifications are subject to

change without notice. Errors, omissions, and modifications excepted. ARRI, ALEXA,

AMIRA, LDS and LENS DATA SYSTEM are trademarks or registered trademarks of

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG. All other brands or products are

trademarks or registered trademarks of their respective holders and should be treated as

such. Original version.

For further assistance

Arnold & Richter Cine Technik

GmbH & Co. Betriebs KG

Türkenstraße 89

80799 Munich, Germany

Email:

[email protected]

Scope

This User Manual applies to the following product:

LMB 6x6 Pro Set 19 mm Studio (KK.0020233)

Risk levels and alert symbols

Safety warnings, safety alert symbols, and signal words in these instructions indicate

different risk levels:

CAUTION indicates a potentially hazardous situation, which, if not avoided, may

result in minor or moderate injury.

CAUTION!

NOTICE banners indicate non-hazardous additional information and do not

require safety alert symbols.

NOTICE

Summary of Contents for KK.0020233



































Search results

Summary of Contents for KK.0020233

Reviews:

Related manuals for KK.0020233

Brands by name

Popular brands

ARRI KK.0020233, User Manual

Search results

Summary of Contents for KK.0020233

Reviews:

Related manuals for KK.0020233

Brands by name

Popular brands