25
3.15 LMB Flag Holder
• I If a bottom flag is needed, the Top/Bottom Flag can be fitted to the bottom of the
matte box using two optional Flag Holders.
• Use a hex driver 3 to mount the flag holders to the bottom of the Basic Module.
3.16 LMB 6x6 Set of Mattes (spherical / anamorphic)
A set of 5 hard mattes with different spherical or anamorphic openings that can be clicked
into the sunshade of the LMB 6x6 to prevent image quality loss caused by stray light.
• Place the matte of your choice at the front of the sunshade. The labelling of the matte
must face away from the matte box with the ARRI logo on top.
• Engage the matte by pressing on the four catches around the sunshade until they
audibly lock.
• To remove: Ease the matte off the four catches and pull it away from the sunshade.
To fit the Top/Bottom Flag at the bottom position, you should use the optional Flag
Holders (pair) (Ident No.: K2.0013825)
NOTICE
Due to the variety of sensor sizes and lens properties, you are advised to test
mattes numbered from 1 to 5 and lens coverage with your own equipment.
NOTICE
Instructions
