24
Instructions
3.14 LMB 6x6 Side Flags
Mounting the side flags
• Open the Flag Holders slightly until a gap of around 4 mm is visible.
• Connect the side flag cut-outs to the Flag Holder.
• To mount: Lock the side flag in place by fastening the Flag Holder nut.
• To remove: Open the Flag Holder nut slightly and pull the side flag out.
How to use
• Unlock the side flags extensions by turning the locking knob counter-clockwise (Fig. 1).
• Bring the side flags in the right position (Fig. 2).
• Lock the side flags extensions by turning the locking knob clockwise.
Adjust Flag Friction
Top/Bottom Flag friction can be adjusted using the flag friction knob. The flag can be
locked into position using the same knob.
Note:
To fold the flags as small as possible, close the side flags first.
Fig. 1
Fig. 2
To fold the flags as flat as possible
without damaging the interior of the top
flag, close the top flag first.
NOTICE
