Array electronic AF-10MR-A2, User Manual

Page: 127 / 129

USER'S MANUAL
Quality Guarantee
(IV) The instruction of USB driver
1. The USB driver of ARRAY is FTD232. His corresponding USB drive cable is AF-
DUSB2.
2. After you install USB driver, pls kindly plug in AF-DUSB2, then show USB pattern in
the lower right corner of the PC.(The initial inspection plan is like plugging in a USB flash
drive.)
3. After AF2 is power on, pls kindly select “Communication configuration”, then could
perform the upload and download between AF2 and PC.
4. If the communication is failed, pls kindly operate as below,
A,Pls kindly detect the communication port(my computer-property-firmware-Device
manager). If you could not find it, pls kindly install USB driver again, and if you could find
it,pls set the COM port optimally between COM1-COM6.
B. Pls kindly confirm if the AF2’s password is correct, and if you do not confirm it, pls
kindly check with your supplier.
C. Pls kindly self-check PLC address( New set-Communicate-Option-Query PLC address),
the default of communicated setting’s address is “0”.
126