Array electronic AF-10MR-A2, User Manual

Page: 100 / 129

FAB2 Intelligent Controller
Fig 4.9 Put the blocks required in the Edit box
Comment: for filling in comment string, less than 20 characters (or 10 Chinese
characters).
Middle Relay: for setting the Middle Relay connected with the current block (the
value range is 0-126).
Special Input: X is empty, HI is high potential, LO is low potential.
3. Click OK button.
4. Repeat the above operation, set properties of all blocks.
Note: Different blocks have different properties setup, especially the special
function blocks. Please refer to chapter III, section 3.3 in detail.
4.2.3 Link
After the above operation, it is necessary to buildup link by control relation, so
as to make a complete diagram. There are two link methods: auto-link and hand-
link.
Operation method:
1. Click Option→Set line mode, and then click Auto or Manual, as shown in Fig.
4.10, the default mode is automatic link mode.
99