Array electronic AF-10MR-A2, User Manual

Page: 110 / 129

FAB2 Intelligent Controller
1.2 Features
1. EMI filter condenser
2. Input frequency: 47-63Hz
3. Output voltage stability: ±0.5%
4. Can be used for DIN rail mounting (EN50022-35)
5. Wide range voltage input (100-240VAC/140-340VDC)
6. Ripple voltage tolerance range(85-264VAC/120 370VDC)
7. Output voltage fine adjustment range (-5%~+10%, adjusting potentiometer V)
8. Have the function of soft-start (to limit the peak current of start and the
pressure of the voltage to the components)
9. The current of the load can be roughly adjusted (Means the maximum
protective current of the load , adjusting potentio-meter A)
10. Effective: >75%
11. Insulation voltage endurance: >1.5KV
12. Power supply output with the LED indicator
13. Ripple: ≤150mVp-p
14. Have the short circuit and over-load protection(short circuit protection means
miss-connect the output voltage in short ,after disconnect,the output will be
renew. Over-load protection:105%-135% )
15. With the UPS function.( External-connected battery, provide with the UPS by
the power supply and the battery)
16. With the remote control function ( By the switch control the having and non-
having of the output voltage)
17. With the over heat protection function ( the main control CMOS chip stops
output when the temperature is beyond 135
℃
and the output will renew automatically
when the temperature reduces)
109